Ø2.0&2.4MM Condylar LCP

2.4MM Locking Condylar Plate is intended for temporary fixation, correction or stabilization of bones in anatomical region of the hand.

• Fracture fixation of the phalanges and metacarpals
• Osteotomies
• Arthrodeses
• Replantations and reconstructions of phalanges and metacarpals, particularly in osteopenic bone

• Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
• The shaft holes accept 2/2.4/2.7MM locking screws in the threaded portion or 2/2.4/2.7MM cortical screws in the compression portion. Plate head accept 2/2.4/2.7MM locking screws in the threaded portion
• Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
• 2.4MM Locking Condylar Plate allow implant placement to address the individual fracture pattern.
• Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
• Choice of different lengths of plate eliminates the need to cut plates.
• Polished surface and rounded edges minimize potential for tendon adhesion.
• Low plate and screw profile minimizes potential for tendon and soft tissue irritation.
• Smaller plates and screws address fracture fragments individually, with less overall implant bulk
• locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.

Detailed surgical technique guides, sterilization instructions and compatibility charts are available in the product catalogue or on request from our clinical support team.