2.7MM Proximal Radius Neck LCP

The radial head neck plate 2.4MM is intended for the treatment of the extra-articular and intra-articular fractures of the proximal radius and multi-fragmented radial neck fractures.

• 2.4/2.7MM Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) indicated for Extra-articular and intra-articular fractures of the proximal radius and multifragmented radial neck fractures.

• Plates are precontoured for anatomical fit.
• Combi holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the Dynamic Compression Unit (DCU) section for distraction. A fixed-angle construct provides advantages in osteopenic bone or multifragment fractures, where traditional
• The holes in the head of the plate accept 2.4MM locking screws and 2MM cortex screws.
• The shaft holes accept 2.4MM locking screws in the threaded portion or 2.7MM cortex screws and 2.4MM cortex screws in the distraction portion. Rounded edges minimize potential for tendon adhesion.
• Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
• Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
• locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.

Detailed surgical technique guides, sterilization instructions and compatibility charts are available in the product catalogue or on request from our clinical support team.