3.5MM Superior Anterior Clavicle LCP With Lateral Extension

The plates are available in stainless steel and titanium and feature a limited-contact shaft profile. The Combi holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the dynamic compression unit (DCU) section for compression.

A fixed-angle construct provides advantages in osteopenic bone or multifragment fractures where screws do not rely on plate-to-bone compression to resist patient load, but function similarly to multiple, small, angled blade plates

• Lateral clavicle fractures
• Fracture clavicle shaft
• Mal-unions of the clavicle
• Non-unions of the clavicle

• Plates available for Left and Right both direction.
• Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
• The shaft holes accept 3.5MM locking screws in the threaded portion or 3.5MM cortical screws or 4MM cancellous screws in the compression portion. Distal locking holes in plate head accept 2.7MM locking screws.
• 2.7/3.5MM Locking Superior Anterior Clavicle Plates Lateral Extension allow implant placement to address the individual fracture pattern.
• Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
• Choice of different lengths of plate eliminates the need to cut plates.
• Pre-contoured plate to match anatomical shape.
• Available in both Titanium and Stainless steel.
• Locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.

Detailed surgical technique guides, sterilization instructions and compatibility charts are available in the product catalogue or on request from our clinical support team.